Preface
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
4
Copyright 2010 FUJITSU LIMITED
P3AM-2922-05ENZ0
The Contents and Structure of this Manual
This document is composed of the following 12 chapters.
• Chapter 1 Workflow
This describes the workflow required to connect an Industry Standard server running
Windows® to an ETERNUS Disk storage system.
• Chapter 2 Checking the Server Environment
This describes which servers can be connected to ETERNUS Disk storage systems.
• Chapter 3 Notes
This describes issues that should be noted when connecting the ETERNUS Disk storage
systems and server.
• Chapter 4 Installing and Setting Up ETERNUSmgr
This describes how to install ETERNUSmgr.
• Chapter 5 Setting Up the ETERNUS Disk Storage Systems
This describes how to use ETERNUSmgr to set up the ETERNUS Disk storage systems.
• Chapter 6 Setting the Fibre Channel Switches
This describes issues that should be noted when using a Fibre Channel switch.
• Chapter 7 Installing the OS
This describes how to install an OS when it is not installed on a server.
• Chapter 8 Installing Drivers
This describes how to install the Fibre Channel cards and ETERNUS Disk storage system
drivers.
• Chapter 9 Checking the Registry Information
This describes how to check the registry information.
• Chapter 10 Checking the Connected Devices
This describes how to check the connection status between the server and ETERNUS Disk
storage system.
• Chapter 11 Creating the Disk Partitions
This describes how to create disk partitions.
• Chapter 12 Setting Up the Cluster Configuration
This describes issues that should be noted when building a cluster system.