8
5. Select [To View...] from the [Scan] menu.
6. Set scanning resolution, document size, etc. on
the [TWAIN driver] window (for setting details
of scanning) and click the [Scan] button.
7. Documents are scanned, and the generated
images are displayed on the [ScandAll 21] win-
dow.
If the scanning completes without any trouble, the
installation performed successfully.
For details on various types of scanning, refer to the "fi-
5120C/fi-5220C Operator’s Guide" on the Setup CD-
ROM.
For FUJITSU ISIS Scanner Driver
■
Preparation
Confirm the following items before installing the driver
application.
• Take out the Setup CD-ROM from its pack-
age, but do not insert the Setup CD-ROM
into the CD driver yet.
• Connect the scanner correctly to your PC..
■
Installing the FUJITSU ISIS
Scanner Driver
1. Press the power button to turn on the scanner.
2. Turn your PC on and log on to Windows.
3. If the scanner is automatically detected,
[
Found New Hardware Wizard
] or [
Add/Remove
Hardware Wizard
] dialog box will appear. Click
[Cancel] to close the Wizard window.
HINT
For Windows 98, Windows Me, Windows
2000, Windows XP:
[FUJITSU fi-5120C/fi-5220Cdj]
For Windows 95, Windows NT 4.0:
[FUJITSU TWAIN32]
HINT
For details on [TWAIN driver], refer to the
"FUJITSU TWAIN32 Scanner Driver User’s
Guide" provided on the Setup
CD-ROM.
HINT
For details on how to connect the scanner,
refer to "2.2 Connecting the Scanner to
Your PC" on page 4.
HINT
Windows XP screenshots are used in this
section as examples. The windows and
operations may vary slightly, if your OS is
other than Windows XP.
ATTENTION
When using Windows NT 4.0, Windows 2000
or Windows XP, log on as a user with
"Administrator" privileges (privileges of the
administrator of your PC).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
