fi-5120C/fi-5220C Image Scanner Getting Started AP-3
■ Temporary error
To troubleshoot the indicated errors above:
• "U0" error
Confirm that the shipping lock is released.
• "U1" error
Remove all jammed documents.
Confirm that the documents meet the paper con-
ditions for scanning.
Refer to fi-5120C/fi-5220C Operator’s Guide "5.
Troubleshooting" on the Setup CD-ROM.
• "U2" error
Remove all jammed documents.
Confirm that the documents are within the
required paper preconditions for scanning.
Refer to fi-5120C/fi-5220C Operator’s Guide
"6.2 Document Quality" on the Setup CD-ROM.
• "U4" error
Close the ADF cover completely. For the details,
refer to "5 TROUBLESHOOTING" in the "fi-
5120C/fi-5220C Operator's Guide" on the Setup
CD-ROM.
• "U6" error
This is a temporary error related with the
Imprinter option (sold separately). Refer to fi-
512PR Operator’s Guide "5 Error Message".
■ Device alarm (Non-Temporary
error)
When you encounter any alarm on the display, turn the
scanner off and on. If the alarm is still displayed on the
Function Number display, contact the store where you
purchased the scanner or an authorized FUJITSU scan-
ner service provider.
Indication Meaning
U0
Shipping lock error (fi-5220C)
U1
Paper feed error
U2
Multi feed error
U4
The ADF cover is opened.
U6
Print cartridge not installed (fi-5120C)
Indication Meaning
E0
Flatbed motor malfunction.
E1
Trouble in the optical system
(Flatbed).
E2
Trouble in the optical system (front).
E3
Trouble in the optical system (back).
E4
The motor’s fuse has blown out.
E6
Trouble in the operator panel.
E7
Trouble occurred in the internal memory
(EEPROM).
E8
The SCSI interface fuse has blown out.
E9
An error in the image memory.
EA
Trouble with the Imprinter.
Ec
An alarm in the memory.
Ed
Trouble with the SCSI interface control-
ler.
EF
Trouble with the background switching
mechanism.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
