3.1 Remedying Typical Troubles
fi-60F Image Scanner Operator’s Guide 31
TROUBLESHOOTING
3
YES
NO
Did you adjust the offset
(starting position for scanning
the document)?
Adjust the offset.
Symptom 4
There is a shadow on the leading edge of
the scanned images.
Check the items in "3.2 Items
to check before contacting
the dealer where you bought
the scanner" and contact
the dealer or an authorized
FUJITSU service provider.
Display the properties of the
scanner that you are using on
"Scanners and Cameras" in the
control panel,
then select [Device Set] - [Offset]
button and adjust the [Sub-scan
Setting].
To Next Page
Loading...
