Fujitsu fi-65F - Turning the Power ON;OFF; Daily Care; How to Turn the Power on

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
15
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
This section explains how to power on/off the scanner.
How to Turn the Power ON
Normally, when the following cables are connected, the
scanner is turned on/off in sync with the computer's power.
z USB cable
z Power cable or USB bus power cable
When the computer is turned on, the scanner is turned on and
the power LED lights in green.
1.3 Turning the Power ON/OFF
Power LED
ATTENTION
z If the scanner is not turned on when the computer is turned on, press
the [Power] or [Scan] button to turn on the scanner.
z If the power LED does not light up while the computer is turned on,
press the [Power] or [Scan] button to turn on the scanner.
[Power] button
[Scan] button