Index
Contents
Chapter 2 How to Scan Documents
Appendix
Glossary
Introduction
TOP
21
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
How to Scan
Documents
6 Select a scanner driver.
For some image scanning applications, selection of a scanner driver
may not be needed.
7 Select a scanner.
Make sure to select the scanner model that is connected to the
computer.
For some image scanning applications, selection of a scanner may
not be needed.
8 In the scanner driver's setup dialog box, configure the
scan settings.
For some image scanning applications, the scanner driver's setup
dialog box may not appear.
9 Scan the document with the image scanning application.
ATTENTION
When the scanner is communicating with the computer, for
example during scanning, take note of the following:
z Do not unplug the USB cable.
If the USB cable is unplugged and immediately plugged back
again, it may take about two minutes until the computer
recognizes the scanner.
z Do not perform an operation that causes disconnection of the
communication between the scanner and the computer, such
as logging off the user account.
To Next Page
Loading...
