Fujitsu GENERAL ARHG72LHTA - Function Settings; 12-1.Function Settings on Indoor Unit

12. Function settings
To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE:
Incorrect settings can cause a product malfunction.
12-1. Function settings on indoor unit
¢
Models: ARHG72LHTA and ARHG90LHTA
By using some components on the PCB, you can change the function settings.
Related components on the PCB and the applicable settings
Component Setting content
DIP switch100
1
Remote controller address setting
2
3
4
DIP switch101
1 Setting change prohibited
2 Setting change prohibited
3 Fan delay setting
 Component location
Components on the indoor unit main PCB used for the function settings are located as shown
in the following figure.
SW100
1234
SW101
123
- 35 -
DUCT TYPE ARHG72-90LHTA