Working w ith the notebook
Inserting battery
3
3
1
2
► Position the battery at the edge.
► Insert the battery into the battery compartment until it engages positively (1).
► Slide the release button in the direction of the arrow (2).
► Slide the release button in the direction of the arrow (3).
► Complete the removal, see chapter "
Finishing compon ent removal", Page 53.
Optical drive (optional)
Opticaldri
ve
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER C LASS 1, and must therefore not be opened.
Even if you r system is not equipped with the optional optica l drive, the eject button and
the opening for the emergency eject are still present, but have no function.
Fujitsu 31
To Next Page
Loading...
