Troublesho ot ing and tips
The LCD screen is difficult to read
LCDscreenLCDscreen
Cause Troub leshooting
Reflected glare ► Turn the notebook or alter the tilt of the LCD
screen.
► Increase the brightness of the screen.
The external monitor rem
ains blank
Monitor
Cause Troub leshooting
Monitor is switched off. ► Switch the external mon itor on.
Power saving has been activat ed (monitor is
blank).
► Press any key to continue.
Brightness is set to dark.
► Adjust the brightne
ss of the monitor.
Screen output is s et to the notebook’s LCD
screen
► Press the key combi
nationtoswitchthe
screen outpu t, see
"
Key combinati ons",
Pag e 23.
The externa l moni
tor’s power cable or data
cable is n ot conn
ected properly.
► Switch off the e xternal monitor and the
notebook.
► Check whether the power cable is plugged
properly into the external monitor and into
the powe r socket.
► Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
► Switch on the external monitor and th e
notebook.
The external monitor is blank or the image is unstable
ScreenMonitor
Cause Troub leshooting
The wrong external monitor has been selected
or the wrong screen resolution ha s been set for
the application program.
► Terminate the application program in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after closing the program, use
the key combination for switching the screen
output (see "
Key combina tions", Page 23)to
switch over to th e noteboo k’s LCD screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in t he documentation for your
operating system.
Fujitsu 59
To Next Page
Loading...
