Settings in BIO S Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard ch anges and
exit BIOS Setu p Ut ilit y
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes w ithout exiting
the B IOS Setup Utility
► To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS S etu p Utility w as called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, s elect Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the B IOS Setup Utility
► To save the changes, select Save Changes and Yes.
The changes are saved. You can no w make additional setting s in the BIOS Setup Utility.
► If you want to exit BIOS S et up Utility with these s ettings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the c hange s and sw itch off your device, select Save Changes and Power Off and Yes.
The changes are s aved. Your device is shut down.
56 Fujitsu
To Next Page
Loading...
