Removing and inst alling components
during servicing
Installing a m emory module
2
a
1
► Insert the memory m o dule with t he contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place ( 2).
Securing the c over
2
1
► Place the cover into its insta llation po sition in the direction of the arrow (1).
The screws of the memory cover and the hard disk cover a re different lengths.
When installing the cover, you must use the co rrect screws.
If you install the wrong screws, components ma y be damaged.
► Secure the cover using the screw (2).
Fujitsu 49
To Next Page
Loading...
