Removing and installing com ponents
during servicing
Removing the cover
1
2
► Remove the screw (1).
Keep the screw in a safe place. If you are removing several components at the same
time, store the screws for the individual components separately from each other.
The screws of the memory cover and the hard disk cover are different lengths.
When installing the cover, you must use th e correct screws.
If you install the wrong screws, compon ents may be damaged.
► Lift the cover off the notebook (2).
Removing m
emory modules
3
2
1
1
► Carefully push th e two mounting
clips outwards (1).
Memorye
xpansion
Memorym
odule
The m emo
ry module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
48 Fujitsu
To Next Page
Loading...
