First-time setup of your d evice
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 15.
If your device is equipped with a Windows operat ing system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecti ng", Page 20.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time se tup pr ocess.
When the device is delivered, the battery is locate d in the battery compartment. The ba ttery
must be ch arged if you want to operate your device using the battery.
When used on the mo ve, the built-in battery provides the device w ith the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e .g. mouse, printer) to your
device, please refer to t he opera ting manual for your device.
Unpacking and
checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during tra nsportation.
You m ay ne
ed the packaging in the future, if you n eed to transpo rt your device.
Fujitsu 19
To Next Page
Loading...
