Working with the noteb ook
Wireless components Wireless LAN / Bluetooth / LTE
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Switching the wireless components on and off
► Press the key with the radio symbol to switch the wireless components on and off (flight
mode).
WirelessLANWirelessLANBluetoothBluetooth
The w ireless component indicator will illuminate when one or m ore wireless
components are switched on.
If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and LTE module will also be switch ed off.
Pay attention to the add itional safety notes f or devices with wireless components
provided in the "Safe ty/R egulatio ns" manual.
You can obtain more information on LTE from your service provider.
Setting up WLAN access
• Requirement: A WLAN must be available and you m u st have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via LTE
You can purchase the accessories for LTE reception from your retailer
or your Fujitsu Tech nology Solutions dealer.
If you have orde red an LTE mo dule, your device will already be
prepared when you receive it.
You will find information on establishing the connection with the LTE network
in the documentation for the hardware you are using.
Your device can connect with the Internet via the LTE module. To do this,
use one of the following types of connection:
• USB dongle
a USB stick with your mobile phone provider’s SIM card
• a mobile end-device (e.g. mobile phone) with Bluetooth connection
• a mobile end-device (e.g. mobile phone) with data cable
42 Fujitsu
To Next Page
Loading...
