Removing and installing components
during servicing
Installing a hard disk
Always install the hard disk into the device in the corresponding hard disk ca rrier.
1
2
► Slide the hard disk
into th e hard disk carrier in the direction of the arrow (1).
► Close the hard disk carrier (2).
3
4
► Connect the hard disk cable to the hard disk (3).
► Place the hard disk into the hard disk compartment (4).
Take care not to trap any cables when fitting the cover.
► Re-fasten the cover, see "
Attaching the cover", Pag e 63.
62 Fujitsu
To Next Page
Loading...
