Connecting external devices
USB connection with charging function (USB Type-C)
USBconnectionwithchargingfunction(USBType-C)
You can use this USB port to charge or power a connected USB device.
This is also possible with connected notebook computers by going to the BIOS Setu p Utility
under the menu Advanced > M iscellaneous Configurations and activating the function USB Type-C
Power Delivery on System-Off. Instructions for how to call up and operate the BIOS Setup
Utility can be found in section "
Settings in BIOS Setup Utility", Page 64.
USB devices are hot-pluggable. This means you can connect and disconnect
the ca bles of USB devices while the system is running.
Additional information can be found in the documentation for the USB devices.
With the Port Replicator available as an accessory, the notebook can
be supplied with power via the USB port.
+
► Connect the da ta cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C) of the notebook.
52 Fujitsu
To Next Page
Loading...
