Fujitsu LIFEBOOK E459 - Installing an M.2 Module; Removing an M.2 Module

Removing and installing components
during servicing
Installing an M.2 module
► LIFEBOOK E459: If applicable, place the M.2 adapter in the service compartment.
21
► Insert the M.2 module at a slight angle in the direction of the arrow (1)
into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with the screw (2).
Removing an M.2
module
2
1
► Undo the screw (1).

The M .2 module snaps slightly upwards.
► Pull the M.2 module in the direction of the arrow (2) and out of the slot on
the mainboard and remove it from the casing.
60 Fujitsu