First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 16.
If your device is equipped with a Windows operating system, the necessary
hardware drivers an d supplied software are already pre-installed.
Beforeswitchingitonforthefirst time, connect the device to the AC voltage using
the AC a dapter, see "
Connecting the AC adapter " , Page 21. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. T he display may remain dark for a s hort time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
When the device is delivered, the battery is located in the battery compartment. The battery
must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using t he available energy saving functions.
For i nstructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for you r device.
Unpacking and
checking the device
If you find that damage has occurred during tra nsp ort, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You may ne
ed to reuse the packaging in the future, for e xample if
you need t
o ship your device.
20 Fujitsu
To Next Page
Loading...
