Connecting external devices
USB port with charging function (USB Type-C)
USBportwithchargingfunction(USBType-C)
You can also charge a conne cted USB d evice or operate de vices without an
additional pow er supply at this U SB Type-C port.
This is also possible with the notebook switched off, if the U SB Type-C Power Delivery
on System Off function is activated in the Advanced - Miscellaneous Configurations menu
of the BIOS Setup Utility. Calling up and using the B IOS S etu p Utility is described
in section "
Settings in BIOS Setup Utility", P age 71.
USB devices are ho t-pluggable. This means you c an connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the d ocumentation for the USB devices.
USB 3.1 generation 1 has a data transfer rate of up to 5 Gbps.
USB 3.1 generation 2 has a data transfer rate of up to 10 Gbps.
+
► Connect the data cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C ) on the notebook.
Fujitsu 59
To Next Page
Loading...
