Removing and installing components
during servicing
Installing a hard disk
Always insert the hard disk into the device in the relevant hard disk carrier.
1
2
► Slide the hard disk
into the hard disk carrier in the direction of the arrow (1).
► Close the hard disk carrier (2).
3
4
► Plug the hard disk cable into the hard disk (3).
► Place the hard disk into the hard disk compartme nt (4).
When attaching the cover, take care not to trap any cables.
► Fasten the cover again, see "
Attaching the cover", Page 70.
Fujitsu 69
To Next Page
Loading...
