Working with t he notebook
Hot Key Description
Decrease the brightness of the screen
This H ot Key reduces screen brightness.
DecreasebrightnessDecreas e
Increase screen brightness
This H o t Key increases screen brightness.
Increase
Energy saving func tion s
Use this Hot Key to activat
e the energy s aving functions (see chapter "
Using
the energy saving functi
ons", Page 42).
Energysavingf unctions
Switch between display outputs
Use this Ho t Key to select which screen(s) is/are used for display if an
external monitor is connected.
Screen output is possible:
• only on the LCD screen of the notebook
• on the LCD screen of the notebook and the external monitor at the
same time
• only on the external monitor
This setting is useful if you would like a high resolution an d a high
refresh r ate on an external monitor.
Fn+F10Switchbetweendisp layoutputs
Bilingual keyboard:
Create screenshot
With this Hot Key, a screenshot of the current screen image is created and
stored in the clipboard.
Bilingual keyboard:
Switch virtual n umber keys o n/o ff
This Hot Ke y switches the virtual number pad off or on. The characters
marked at the top right of the k eys are displayed.
Function keys
The symbols be low the keys represent fu nction keys.
They are numbered from
F1
to
F12
.
The function keys are used to activate functions of the operating system or applications directly.
Regardless of the F-Lock setting, the function keys are the primary key function:
• until Windows is loaded (after a system rebo ot).
The F-Lock setting, which was last active before the system reboots, then
reappears (see chapter "
F-Lock settin g", Page 3 2).
• with BIOS access during the POST phase: When during boot-up
Fn
+
F2
or
Fn
+
F12
are pressed, the BIOS menu is not called up. Here the
F2
or
F12
key must be pressed without a n additional key.
Fujitsu 31
To Next Page
Loading...
