Working with the notebook
Inserting or removing a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the data carrier in the drive tray w ith
the printed side facing upwards.
or
► Remove a data carrier that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalofda tacarrier
In the event o
f a power failure or damage to the drive, you can remove the data c arrier manually.
1
2
► Switch your
notebook off.
► Push a pen o r a piece of w ire (such as a
paperclip) fi rmly into the opening (1).
The drive t
ray is ejected. You can now pull
the dri ve t
ray (2) out of the drive.
32 Fujitsu Technology Solutions
To Next Page
Loading...
