Troubleshoot ing and tips
The external monitor is blank or
the image is unstable
ScreenMonitor
Cause Troublesh ooting
The wrong ext ernal monitor has
been selected
or the w rong screen resolution
has been set for
the application program.
► Terminate the ap p lication pro
gram in
Windows by pre ssing
Alt
+
F4
.Ifthe
fault persists after closing t
he program, use
the key combination for switc
hing the screen
output (see "
Key combinati
ons", Page 23)to
switch over to the noteboo k
’s LCD screen.
Change the following sett
ing:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select
monitor 1 or 2 as
described in t he docume
ntation for your
operating system.
The notebook cannot be started
Notebook
Cause Troublesh ooting
The battery is not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch t he notebook on.
The battery is dead.
► C harge the b atte
ry.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
The power adapter is not connected corre ctly.
► Check whethe r the mains adapter is
connected correctly to the notebook.
► Switch t he notebook on.
Fujitsu Technology Solutions 63
To Next Page
Loading...
