Working with the notebook
Switching the wireless components on a nd off
► Press the key combination
Fn
+
F5
to start the Wi relessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The wireless component indicator will illuminate when one or more wireless
components are switched on.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with w ireless
components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can obtain more information on UMT S from your service pro vider.
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating syste m.
Access via UMTS
You can purchase the accessories for UMTS reception from y our retailer
or your Fujitsu Technology Solutions dealer.
If you have ordered a UMTS module, your device will already be
prepared when you receive it.
You will find information on establishing the connection with the UMTS
network in the documentation for the hardware used.
Your device can connect with the Internet via UMTS. To do this, use one of
the following types of connection:
• USB dongle
a USB stick with your mobile phone provider’s SIM card
• a mobile end-device (e.g. mobile phone) w ith Bluetooth connection
• a mobile end-device (e.g. mobile phone) with data cable
Fujitsu Technology Solutions 39
To Next Page
Loading...
