Using your note book
Modules (device-dependent)
ModulebayModules
The design of your notebook enables the flexible use of notebook batteries and drives. More
information about the available m odules can be found under "Technical Data" in the EasyGuide.
The position of the module and the ejection me cha nism varies d epending on the
particular device. Below you will find two descriptions for the removal and installation
of modules. P lease cho ose the matching description f or your device.
DVD-ROMdriveS eco ndhard diskCD-ROMdriveSecondbatter yWeightSaverWeight S aver,seew eightsaverSuper-Multi-FormatDVDdriveDVD+/-R/RWdrive
Only use modules designed for you r notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the m odule bay.
You can replace modules during operat ion
. This means you do not
need to switch off the notebook.
To replace a module, simply click o n the
corresponding icon in the
task bar an d then on Exit or Select - Exi
t.
Then you can simply remove the module.
A26391-K200-Z226-1 -7619 , edition 2 19
To Next Page
Loading...
