Using your notebook
Removing a module
Device variant 1
Module:Drive:Seco ndbattery:Weights aver:
► Place the notebook on a flat surface.
Use the corresponding icon in the task bar to stop the module:
► Left-click on the icon.
► Select the module you want to stop and remove.
► Press the Enter key.
Wa it for the dialogue box which tells you that it is now safe to remove the module.
► Carefully pull the eject lever in the direction of the arro w u p to the stop (1).
The module now extends somewhat beyond the casing.
► Pull the module out of the module bay (2).
20 A26391-K200-Z226-1-7619, edition 2
To Next Page
Loading...
