Connecting external devices
Connecting an external device to S-Video Out
(device-dependent)
Televisionset:Projector:
You can connect a TV set or a projecto r to the notebook.
► Switch off the not ebook and the external device.
► Connect the ext e rnal device to the S Video Out socket of your notebook.
► First switch the external device on and then the notebook.
Activating the external TV / projector
Televisionset:Projector:
► To do this, select the monitor type in the menu Start - (Settings) - Control Panel -
Appearan ce and Themes - Display - Setti ng s - Advanced - Display.
► Click on Apply.
The specified path relates to the advanced settings view in your
Microsoft operating system.
In the menu Start - Control Panel - Appearance and Themes - Display - Settings -
Advanced - "Graphics card folder" (for Intel: e.g. Intel External Graphics) y ou can
select which key co mbination is used to switch over the screen output.
Connecting FireWire devices (device-dependent)
FireWi reConnectingau
diodevices
Videodevices
,connecting
FireWi re:
External devices such as digital aud
io/video devices or other high-speed devices can be connected
to the FireWire port. The FireWire p
ort operates at a speed of up to 400 Mbit per second.
FireWire de vices are hot-pluggabl
e. Therefore, the cables of FireWire devices can
be connected and disconnected wit
h the system switched on. Further information
may be found in the documentation f
or t he FireWire devices.
► Connect the data cable of the exte
rnal devices to the Fire Wire port of the notebook.
► Plug the power cable of the external device into the mains socket.
A26391-K200-Z226-1 -7619 , edition 2 49
To Next Page
Loading...
