Troubleshooting an d ti ps
Previous boot incomplete - Default configuration
used Due to a n error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
► Press the
F1
function key whe n prompted
to do so.
Real Time clock error
► Please contact your sales outlet or our
customer service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
► Please contact your sales outlet or our
customer service centre.
System battery is de ad - Replace and run SETUP
► Please contact your sales outlet or our
customer service centre.
System cache error - Cache disabled
► Please contact your sales outlet or our
customer service centre.
System timer error
► Please contact your sales outlet or our
customer service centre.
Restoring the hard disk contents under Windows
Harddisk:Operatingsystem
,restoring
You can reinstall the operating system with the "Windows Recovery CD" and
the "Drivers & Utilities" CD/DVD.
The instructions are provided on the case of the Recovery CD.
During the reinstall process your personal files and any installed p rograms
will be deleted. We advise you to backup your files to an external hard
drive, or CD / DVD disk before you start.
► Switch the notebook on.
The following display br
iefly appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appear
s, press t he function key
F12
.
► Insert the "Windows Recovery CD" into the optical drive.
► Select CD-ROM and press th
e Enter key.
► Follow the instructions on the screen.
After the installation you
must install all the drivers again. Some installed hardware
components will not be corr
ectly s upported until this has been done.
► Insert the "Drivers & Utilities" CD/D V D into the optical drive. The CD starts automatically.
► Click on the Desk Update but
ton.
► Select Automatic driver installation (Express) and click on Start installation.
► Follow the instructions on t
he screen.
► Restart your notebook when the driver installation is completed.
A26391-K200-Z226-1 -7619 , edition 2 65