Working with the notebook
Removing the c ard
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the corresponding icon in the task b ar:
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the card you want to stop and remove.
► Press the "Enter" key.
Wait fo r the dialog box which tells you that it is now safe to remove the card.
1
2
► If the eject button is lowered, you must
first cause the eject button to release
from the notebook ca sing. To do this,
press the eject button until it pops out.
Press the eje ct button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot (2).
► Insert the card placeholder into the
slot guide.
► Carefully slide the placeholder for the
cardasfarasitwillgointotheslot.
Do not use excessive force.
Loudspeakers and microphones
Microph
one
Loudspe
akers
Basslou
dspeaker (subwoofer)
Volum ec
ontrol
Informat
ion on the exact position of the speakers and microphone c an be found
in "
Port
s and operatin g elements", Page 9.
Please r
efer to chapter "
Key combinations", Page 25 for information on setting the volume
and also
enabling/disabling the loudspeakers using key combinations.
If you a
ttach an ext ernal microphone, the built-in microphone is disabled.
When yo
u connect headphones or external speakers, the built-in speakers are disabled.
Infor
mation on connecting headphones and a microphone can be found
in "
Co
nnecting ext ernal devices", Pag e 61.
Fujitsu Technology Solutions 43
Downloaded from LpManual.com Manuals
To Next Page
Loading...
