Connecting external devices
Connecting external devices to the parallel
or serial port
ParallelportSerialportParallelportSerialportExternaldevicesDevices
The notebook has a serial port. If you wish to operate devices via a parallel port, the n
use the Port Replicator which is available as an option for your notebook.
External devices can be c
onnected to the parallel or se rial port (e.g. a printer or a modem).
► Connect the data cable to
the external device.
► Depending on the device, connect the data cable to the parallel port or the serial port.
For an exact descripti
on of how to conne ct external devices to the co rresponding
port, please see the ex
ternal device docum entation.
Port settings
ParallelportSerialport,
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Deviced riversDevice drivers,
The devices connected to the parallel or serial port require drivers. Your operating
system already includes many drivers. If the re quired drive is missing, install it. Current
drivers are usually available on th e Intern et or will be supplied on a data medium.
Fujitsu Technology Solutions 63
Downloaded from LpManual.com Manuals
To Next Page
Loading...
