Troubleshooting and tips
The external m onitor is blank or
the image is unstable
ScreenMonitor
Cause Troub lesho ot ing
The wrong external monitor has
been selected
or the wrong screen resolution
has been set for
the ap plication program.
► Terminate the application pro
gram in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after closing t
he program, use
the k ey combination for switc
hing the scre en
output (see "
Key combinati
ons", Page 25)to
switch over to the notebook
’s LCD screen.
Change the f ollowing sett
ing:
► Set the screen resolution: Set the screen
resolution as described in the docume ntation
foryouroperatingsystem.
► Select monitor: Select
monitor 1 or 2 as
described in the docume
ntation for your
operating system.
The notebook cannot be started
Notebook
Cause Troub lesho ot ing
The battery is not installed correctly.
► Check whether the battery is installed
correctly in its com partment.
► Switch the notebook on.
The battery is dead.
► Charge the batte
ry.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
The power adapter is not connected correctly.
► Check whether the m ains adapter is
connected correctly to the notebook.
► Switch the notebook on.
80 Fujitsu Tech nology Solutions
Downloaded from LpManual.com Manuals
To Next Page
Loading...
