Removing and installing components
during servicing
Removing and i nstalling compo
nents
during servicing
Only qualified technicians should repair your notebook. Un authorised
opening or incorrect repair may greatly enda nger the user (electric shock,
fire risk) and will invalidate your warran ty.
Components
Serv icin g
After consulting the Hotline/Service Desk, you may remove and install the
components described in this chap ter yourself.
If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of y our notebook will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pull the power plug out of the mains socket.
• Always rem ov e the ba ttery.
• Take care when you u se the locking mechanisms on the battery and any other component.
• Never use s harp objects such as screwdrivers, scissors or k nives as leverage to remove covers.
NotesBoa rdESD
Boards w ith electrostatic sensitive d evices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always ob serve the following
points:
• You must alw ays discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use mu st be free of static charges.
• Remove the power plug from the mains supply befo re inserting or removing
boards containing ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
68 Fujitsu Tech nology Solutions
Downloaded from LpManual.com Manuals
To Next Page
Loading...
