Troubleshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated. ► Calibrate the stylus as shown under
Hard ware and Sound / Tablet PC S ettin gs
in the Control Panel, see "
Adjusting the
stylus", Page 40 and "Calibrating the stylus",
Page 40.
Stylus input n ot working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install th e driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the driver for the "D ual Digitizer"
model.
The notebook d
oes n ot start after switching it on
Notebook
Cause Troubleshooti
ng
The battery is
not in stalled correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charged ba ttery.
or
► Connect the AC adapter to the notebook.
The AC adapter is not connected properly. ► Ch eck w hether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
98 Fujitsu
To Next Page
Loading...
