First-time setup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Importa nt no tes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers an d supplied software are alread y pre-installed.
Beforeswitchingitonforthefirst time, connect the device to the A C voltage using
the AC adapter, s ee "
Connecting the AC adapter", Page 19. The AC adapter must
remain co nnected during the whole o f the installation process.
A system test is performed when your device is first switched on. Various messages
can a ppear. T he display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the b a ttery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you w ant to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
checking the d evice
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You may ne
ed to reuse the packaging in the future, for e xamp le if
you need t
o ship your device.
18 Fujitsu
To Next Page
Loading...
