Connecting external devices
Connecting an external monitor
An analog monitor is co nnected to the analog external monitor port (VGA), a digital
monitor to the Display Port or to the DVI-D monitor po rt on the optional port replicator.
The display output is limited to a maximum of two monitors at any one time (see "
Key
comb inations", Page 47, section "Toggle display ou tput").
MonitorVGA socketMoni to rportMonitorp ort
Digital Display Port (on notebook or on op tional
port replicator)
Analog external mo nitor port (VGA) (on
notebook or on optional port replicator)
Digital DVI-D monitor port (on optional port
replicator)
► Switch off the notebook a nd the external monitor.
► Plug the data cable o f the external monitor into the monitor port.
► First switch on the external mon itor and then the notebook.
You can also switch back and forth between the external monitor and the LCD
screen of the note book, see chapter "
Key combinations", Page 47.
You c an display the same picture o n the external monitor and the
notebook LCD screen simultaneously.
Fujitsu 79
To Next Page
Loading...
