Removing and installing components
during servicing
Removing and installing the har
ddisk
Removing a cover
• Requirement: The dust chamber cover is removed, see "Removing and fitt ing the
dust removal cover (ventilation slot cover)", Page 69.
1
2
1
► Remove the screws (1).
Keep the screws in a safe place. If you are removing m ore than one component at
the sam e time, store the screws for the individual componen ts separate from each
other. If you install the wrong screws, components may be damaged.
► Slide the cover in the directio n of the arrow ( 2), and lift it away from the notebook.
Fujitsu Technology Solutions 99
To Next Page
Loading...
