Working with the notebook
ExpressCards
SlotExpressCard
An ExpressCard slot allows an ExpressCard/54 to be used with the comp uter.
Consult the documentation supplied by the ExpressCard’s manufactu rer
and follow the instructions provided.
Never use f o rce when installing or rem oving an ExpressCard.
Make sure that no foreign objects enter the ExpressCard slot.
Inserting the card
Keep the placeholder for the slot in a safe place. When you remove the card again you
must reinstall the placeholder. T his prevents foreign bodies from getting into the slot.
1
2
► If the e ject button (1) is recessed, press it
once so that it disengages. Now press the
eject button a g ain so that the placeholder
protrudes slightly from the notebook.
► Pullthecardplac
eholder out of th e slot (2).
2
► Insert the car
d into the slot guide with
the connecti
on contacts first.
► Gently push th e card into the slot either
until it will go no further or you feel it
engage. Do not use excessive force.
Depending
on the type, th e card may
protrude s
lightly from the slot.
Please see the documentation relating to the card for driver installation instructions.
Fujitsu Technology Solutions 73
To Next Page
Loading...
