Connecting external devices
Connecting an external m onitor
You can connect an external monitor to the analogue VGA monitor conn ection of the
notebook. Screen output is limited to a maximum of two screens at any one time (see
"
Key combinations", Page 52, section "Toggle output screen").
MonitorVGA connectionsock etScreenportMonitorport
Analogue VGA monitor connection so cket
► Switch off the notebook and the external monitor.
► Connect the data cable of the external monitor to the monitor port of the notebook.
► First switch on the external monitor and then the notebook.
You can also use a key combination to switch back and forth between the external
monitor and the notebook’s LCD screen, see chapter "
Key combinations", Page 52.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu Technology Solutions 89
To Next Page
Loading...
