Working with the notebook
Combin ation Description
To ggle output screen
Fn+F10Toggleout putscreen
Use this key combination to select which screen(s) is/are used for
display if an external monitor is connected.
Screen output is possible:
• only on the notebook’s LCD screen
• only on the exte rnal monitor
• on the notebook’s LCD screen and the external monitor at the
same ti me.
Press the key combination several times to switch through a ll
possible settings.
If you have connected two external monitors to the port replicator,
the following display outputs are possible:
• only on the notebook’s LCD screen
• only on th e external monitor (analogue)
• at the same time on the LCD screen (digital)
• at the same time on the n otebook’s LCD screen and on the
external monitor (analogue)
You cannot use the key combination to switch output at the same
time to both external monitors on the Port Replicator.
+
Ctrl
C
Halt current operation
This key combination can be used to halt an operation instantly
without clearing the keyboard buffer.
Back tab
This key c ombination moves the c ursor back to the previous tab
stop.
Fujitsu Technology Solutions 53
To Next Page
Loading...
