● 4 - 7
- Photosensitive paper
- Perforated or punched documents
- Documents that are not square or rectangular
- Very thin documents
• Do not use the following type documents for scanning with the ADF.
- Paper-clipped or stapled documents
- Documents on which the ink is still wet
- Documents smaller than A8 (portrait) size
- Documents wider than A3 or 11 in. x 17 in. size
- Documents other than paper such as fabric, metal foil, or transparencies
• When using the ADF, the leading edge of all document sheets must be evenly aligned. Make sure that
curling at the leading edge is withtin the following toleranaces:
• To avoid skewing, do not feed documents of different widths during the same batch.
Adjust the stacker extension to the paper
size.
Less than
3mm
More than 30mm Feed direction
Read surfaceTop of the paper
More than 30mm
Feed direction
Read surface
Top of the paper
Less than
5mm
!
Stacker ADF paper chute
To Next Page
Loading...
Need help?
General