Fujitsu M3093GX User Manual

● 9 - 8
13. Select Front Document Type by pressing or .
Press to confirm. The scanner displays Screen 11.
Screen 11
14. Select Back Document Type (when “Duplex” was specified) by pressing or . The parameters
are the same as in step 13. Press to confirm. The scanner displays Screen 12.
Screen 12(Examjple)
15. Confirm what you have specified.
If some parameter needs to change, press or to select the corresponding screen and
re-select the parameter by pressing or and finally press .
If all parameters are acceptable, press to return to the “Scanner Ready” screen.
Parameter
Description
L. (Line) White level following is ON. Top 3mm part of the document must be left blank
(grounding color is drop-out color). Use this specification for reading line arts or
texts.
P. (Photo) White level following is Off.
Use this specification for reading photographs.
=
Li ne/
P
h
ot o
11 Ba
c
k
Doc .
Line Art
or Photo
Halftone
Density
Resolution
Portrait or Landscape
Paper size
Front side(F) or Back side(B)
Simplex(S) or Duplex(D)
DBA4
4
0
0
H1 P
M
DFA4
4
0
0
H1 P

Fujitsu M3093GX Specifications

General

Brand	Fujitsu
Model	M3093GX
Category	Scanner
Language	English