EasyManua.ls Logo

Fujitsu MCJ3230AP - Page 191

Fujitsu MCJ3230AP
199 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
C156-E205-01EN IN-3
G
General description 1-1
General notes 3-18
GET MEDIA STATUS 4-25
GET MEDIA STATUS command 4-25
H
Half-height standard 90 mm (3.5-inch) 1-2
Hardware reset 4-13,
Head cleaner 5-6
High-speed data transfer 1-2
High-speed mean seek time 1-2
Host end timing 4-84
Host interface 4-1
Host stop timing 4-83
Host suspend timing 4-87
I
IC 3-2
IDENTIFY PACKET DEVICE 4-26
IDENTIFY PACKET DEVICE command
4-26
IDLE IMMEDIATE 4-33,
IDLE IMMEDIATE command 4-33
Idle mode 4-18
Initialization timing 4-82, 4-85
Initial operation when power is turned on
3-22
Initial self-diagnosis 6-2
INQUIRY command 4-42
INQUIRY data 4-43
Inserting cartridge 5-3, 5-4
Inside optical disk cartridge 3-2
Installation 3-19
Installation direction 3-8
Installation requirement 3-1
Interface 1-4
Interface register 4-6
I/O and C/D 4-11
I/O port function and mapping 4-6
I/O register 4-6
J
Jumper setting 3-15
Jumper setting at factory shipping 3-15
L
Leak magnetic field 3-11
LED indication 4-20
Logical block address format 4-68
Lower power consumption 1-3
Low temperature burn 3-1
M
Maintainability/operability 1-3
Maintenance information 6-3
Maintenance requirement 6-3
Master device setting 3-15
Mean time between failures 1-3, 2-6
Mechanical section 1-7
Media interchangeability 1-2
Media status notification function 4-16
Model and order number 2-1
Model and product number 2-1
Mode page format 4-46, 4-57
Mode parameter 4-44
Mode parameter header 4-45, 4-54, 4-56,
4-58
Mode parameter list 4-45, 4-54, 4-56, 4-58
MODE SELECT (10) command 4-53
MODE SELECT (6) command 4-44
MODE SENSE (10) command 4-57
MODE SENSE (6)command 4-55
Mode setting 3-15
Mounting requirement 3-5
MO write cache 4-16
MTBF 1-3, 2-6
Multiword DMA data transfer 4-80
Multiword DMA data transfer timing 4-80
Multiword DMA data transfer timing
parameter 4-81
N
No overhaul 1-3
NOP 4-33
NOP command 4-33
Note following when affixing index label
5-9
Note on mounting 3-10
Note on usage and storage of cleaning kit
5-12
O
ODD connected to device 1 4-24
Operating optical disk drive 5-1
Operation and cleaning 5-1
Operation confirmation and preparation for
use after installation 3-22
Optical disk cartridge 2-8, 5-7

Table of Contents

Related product manuals