Fujitsu MCJ3230AP - Page 192

Index
C156-E205-01EN IN-4
Optical disk cartridge load/eject 1-7
Optical disk cartridge operation 5-7
Optical disk cartridge specification 2-7
Optical disk drive 5-2
Optical disk drive configuration 1-7
Optical disk drive front view 5-2
Optical disk drive specification 2-1
Outer view 1-6
P
Packed item (cleaning kit) 5-11
PACKET 4-34
PACKET command 4-34, 4-39
PACKET command code and parameter
4-39
Packing 3-19
Packing style 3-20
Page control field 4-55
Panel 1-8
Panel attached 1-6, 3-7
Panel function processing 3-11
Panel not attached 1-6, 5-2
Performance 1-1
Pin assignment 4-2
Power condition page 4-51
Power condition page default value 4-52
Power condition page variable 4-51
Power management function 4-17
Power mode 4-17
Power mode indication 4-22
Power mode transition 4-19
Power-on and reset timing 4-90
Power-on reset 4-13,
Power supply requirement 3-12
Pre-idle mode 4-17
PREVENT/ALLOW MEDIUM REMOVAL
command 4-59
Preventive maintenance 6-3
Processing error rate 2-5
R
Random/sequential read test 6-2
READ (10) command 4-60
Read-ahead cache feature 1-4
Read cache 4-15
READ CAPACITY command 4-60
READ CAPACITY data 4-61
READ DEFECT DATA (10) command
4-62
READ DEFECT DATA (12) command
4-64
READ FORMAT CAPACITIES command
4-61
READ FORMAT CAPACITIES data format
4-61
READ LONG command 4-65
Read-write error recovery page 4-46
RECEIVE DIAGNOSTIC RESULTS
command 4-66
Recommended optical disk cartridge
specification 2-7
Register/PIO data transfer 4-78
Register/PIO data transfer timing 4-78
Register/PIO data transfer timing parameter
4-79
Reliability 1-3, 2-6
Removing cartridge 5-5
REQUEST SENSE command 4-66
Request sense data 4-67
Reset response 4-13
Response to prevent/allow/eject 4-59
Revision label 6-4
Revision number indication 6-4
S
Safety standard 1-4
Sector number register 4-11
SEEK command 4-71
Selector address format 4-64
Self-diagnosis detailed code 4-24
Self-diagnostic function 6-1
SEND DIAGNOSTIC command 4-71
Sense key code 4-68
Separate optical section 1-8
Service clearance 3-11
Service life 2-6, 6-3
Service system and repair 6-3
SET FEATURES 4-35
SET FEATURES command 4-35
Setting master device mode 3-15
Setting slave device mode 3-16
Shock resistance 1-4
Shutter closed 2-8
Shutter open 2-8
Signal description 4-4, 4-5
Signature 4-14
Slave device setting 3-16
SLEEP 4-37
SLEEP command 4-37