Fujitsu MCJ3230AP - Page 193

Index
C156-E205-01EN IN-5
Sleep mode 4-18
Specification 2-1
Spindle motor 1-7
STANDBY IMMEDIATE 4-38
STANDBY IMMEDIATE command 4-38
Standby mode 4-18
Standby timer 4-18
START/STOP/EJECT processing 4-72
START/STOP UNIT command 4-72
Storage 3-20
Storing cartridge 5-10
Surface temperature measurement point 3-2
SYNCHRONOUS CACHE command 4-73
System configuration 1-10
System configuration with one optical disk
drive 1-10
System configuration with two optical disk
drives 1-10
System ground 3-12
T
Temperature at measuring point 3-4
Temperature measurement point 3-1
Temperature requirement and measuring
method 3-3
Temperature requirement at measurement
point 3-3
Temperature rise under several condition
3-4
Test program 6-2
TEST UNIT READY command 4-73
Timing 4-78
Transfer setting value in SC register 4-36
Transportation 3-20
Transporting cartridge 5-10
U
Ultra DMA data in transfer 4-82 to 4-84
Ultra DMA data out transfer 4-85, 4-87
Ultra DMA data out transfer (continuous
transfer timing) 4-85
Ultra DMA data out transfer parameter 4-89
Unpacking 3-18
Unsupported function 4-19
Using cartridge 5-9
V
Various process 4-13
Various radio wave standard 1-4
VERIFY command 4-74
Verify control page 4-52
Verify control page default value 4-53
Verify control page variable 4-53
Verify mode 4-52
Vibration resistance 1-4
W
Wide operating environment 1-4
WRITE (10) command 4-74,
WRITE AND VERIFY command 4-75
WRITE BUFFER command 4-76
Write cache feature 1-5
WRITE LONG command 4-77
Write protect tab 5-8
Write/read test 6-2