EasyManuals Logo

Fujitsu Primergy RX100 S3 Options Guide

Fujitsu Primergy RX100 S3
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
U41617-J-Z156-1-76 Options Guide 19
5Main memory
V CAUTION!
Observe the safety instructions in the chapter “Safety notes” on page 11
et seqq. .
The system board supports up to 4 Gbytes of main memory. Four slots (2 slots
form a memory bank) are provided for the main memory. Each memory bank
can be equipped with 512 Mbyte, 1 Gbyte or 2 Gbyte unbuffered PC2-533
(PC2-4200) DDR2 SDRAM memory modules.
5.1 Equipping rules
Figure 4: Structure of the main memory in memory banks and memory modules
Mix of memory is permitted.
For the dual-channel configuration: install identical memory modules in
DIMM_1A and DIMM_1B and identical memory modules in DIMM_2A and
DIMM_2B.
CPU Front Side Bus (FSB) DDR2 SDRAM Type
533 MHz (Celeron) PC2-533 (PC2-4200)
800 MHz PC2-533 (PC2-4200)
DIMM2B
DIMM1B
DIMM2A
DIMM1A
IDE 1
CN16
CN21
CN20
CN22
CN17

Other manuals for Fujitsu Primergy RX100 S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Primergy RX100 S3 and is the answer not in the manual?

Fujitsu Primergy RX100 S3 Specifications

General IconGeneral
BrandFujitsu
ModelPrimergy RX100 S3
CategoryServer
LanguageEnglish

Related product manuals