To Next Page

To Previous Page

14 Service Supplement RX100 S3

Safety notes

V CAUTION!

● All batteries containing pollutants are marked with a symbol (a

crossed-out garbage can). In addition, the marking is provided with

the chemical symbol of the heavy metal decisive for the classification

as a pollutant:

Cd Cadmium

Hg Mercury

Pb Lead

Notes on handling CDs and CD-/DVD-ROM drives

V CAUTION!

● Use only CDs in proper condition in the CD-/DVD-ROM drive of your

server to prevent data loss, damage to the device and injuries.

● Therefore, check each CD for damage, cracks, breakage etc. before

inserting it in the drive.

Please note that any additional labels applied may change the

mechanical properties of a CD and cause imbalance.

Damaged and imbalanced CDs can break at high drive speeds (data

loss).

Under certain conditions sharp-edged pieces of broken CDs can

penetrate the cover of the drive (damage to the device) and be thrown

out of the device (danger of injury, particularly on uncovered body

parts such as the face or neck).

I You protect the CD-/DVD-ROM drive and prevent mechanical damage,

as well as premature wearing of the CDs, by observing the following

suggestions:

– Only insert the CDs in the drive when needed and remove them after

use.

– Store the CDs in suitable sleeves.

– Protect the CDs from exposure to heat and direct sunlight.

Fujitsu Primergy RX100 S3 Service Supplement

Other manuals for Fujitsu Primergy RX100 S3