EasyManuals Logo

Fujitsu Primergy RX100 S3 Service Supplement

Fujitsu Primergy RX100 S3
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
RX100 S3 Service Supplement 15
Safety notes
Note about the laser
The CD-/DVD-ROM drive is classified for laser class 1according to
IEC 60825-1.
V CAUTION!
The CD-/DVD-ROM drive contains a laser diode (LED). Sometimes the
LED produces a stronger laser beam than laser class 1. Direct view into
this laser beam is dangerous.
Never remove parts of the CD-/DVD-ROM drive assembly!
Modules with electrostatic-sensitive components:
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plug from the power socket before inserting or removing
components containing ESDs.
You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
The equipment and tools you use must be free of static charges.
Only touch the components at the positions highlighted in green (touch
points).
Do not touch any exposed pins or conductors on a component.

Other manuals for Fujitsu Primergy RX100 S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Primergy RX100 S3 and is the answer not in the manual?

Fujitsu Primergy RX100 S3 Specifications

General IconGeneral
BrandFujitsu
ModelPrimergy RX100 S3
CategoryServer
LanguageEnglish

Related product manuals