Fujitsu PRIMERGY RX1330 M4 - Slots and Drive Bays

98 Operating Manual RX1330 M4
Technical data
Slots - standard
Drive bays
Slot 1: PCIe Gen3 x8
(mechanical x8)
notched, up to 167,65 mm length, low profile
Slot 2: PCIe Gen3 x4
(mechanical x8)
notched, up to 167,65 mm length, low profile
Slot 3: PCIe Gen3 x8
(mechanical x8)
notched, up to 167,65 mm length, low profile
Slot notes As an option, a full height riser module can be
installed. In this case the slot 2 is not available and
slot 3 can be equipped with a full height expansion
card.
HDD bay configuration up to 4x 3.5-inch HDD
up to 8x 2.5-inch HDD/SSD
up to 4x 2.5-inch PCIe SSD + 4x 2.5-inch HDD/SSD
up to 10x 2.5-inch HDD/SSD
Accessible drive bay 1x 1.6-inch for Ultra Slim ODD