RX200 S5 Options Guide 19
4 Preparation
V CAUTION!
Follow the safety instructions in the chapter “Safety instructions” on
page 13.
4.1 Pulling out/removing the server
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the on/off
button.
Ê Pull all power connectors out of the power outlets.
Ê Loosen the knurled screws on the sides and pull the server carefully out of
the rack as far as it will go.
I If the server is not easily accessible once it has been pulled out,
remove it from the rack completely. See the operating manual for
details on how to remove the server from the rack.
V CAUTION!
At least two people are needed to remove the server from the rack.
To Next Page
Loading...
