52 Options Guide RX200 S5
Installing an iBBU Expansion cards and iBBU
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: W:\Anwendungsdaten\FCT\tim_local\work\PICHOL\OBJ_DOKU-4106-001.fm
Ê Close the server, connect all power plugs to the power outlets, and switch on
the server as described in chapter “Completion” on page 61.
9.3 Installing an iBBU
If a modular RAID 5 controller is installed in riser card #3, you can add an iBBU
(intelligent Battery Backup Unit) to it.
Figure 29: iBBU installation kit
Ê Open the server as described in chapter “Preparation” on page 19.
1 Connection cable from the iBBU to the RAID 5 controller
2iBBU
1
2
To Next Page
Loading...
